Forced Pin Code Access - Canon Laser Class 700 Series Reference Manual

Forced PIN Code Access

Follow this procedure to dial when Forced PIN Code Access (NECESS. PIN
CODE) has been turned 'ON'. With Forced PIN Code Access 'ON', you must enter
a PIN code every time you dial. The PIN code must be entered either before or after
the number, depending on how PIN code access has been set up. (See "Setting a
PIN Code," on p. 4-22.)
1
Place your documents on the machine.
For instructions explaining how to place your documents on the machine, see
Chapter 3, "Sending Documents," in the Facsimile Guide.
NOTE
•
You can adjust the resolution, contrast, and document type for scanning. (See
Chapter 3, "Sending Documents," in the Facsimile Guide.)
• You can also specify a sender's name with [TTI Selector]. (See Chapter 3,
"Sending Documents," in the Facsimile Guide.)
1 2 3 2
Dial the telephone number using the numeric keys, press a
4 5 6
speed dialing key, or press [Coded Dial] followed by a three
7 8 9
digit code.
0
1
72
Coded Dial
3
Start
Press [Start].
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Setting Up and Using PIN Codes
4
4-31