Setting Items - Canon Laser Class 700 Series Reference Manual

Setting Items

Settings
SYSTEM SETTINGS
PASSWORD
1.SYS. ADMIN. INFO
1.SYS. ADMIN. ID.
2.SYSTEM PASSWORD
3.E-MAIL ADDRESS
2.DEPT.ID MANAGEMNT
OFF*
ON
1.DEPT. ID ENTRY
1.PASSWORD
2.COPY LIMITS
3.TX LIMITS
4.SELECT SENDER
2.COUNT MANAGEMENT
1.COUNT INFORMATION Display the counter information for each department.
1.PRINT COUNT
2.SEND COUNT
2.COUNT RESET
1. ON*
2. OFF
An asterisk (*) indicates the default setting.
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Description
Enter the system password protecting the system settings.
(You do not have to do this if the system settings are not yet
password protected.) (See Chapter 4, "Restricting the Use of
the Machine.")
Set the System Administrator's ID and password to protect the
system settings. You cannot use '0' for the System
Administrator's ID.
If you set the System Administrator's ID to 0, the registered
System Administrator's ID is deleted.
1-9999999
1-9999999
Up to 60 characters
Set restrictions for sending and printing with Department IDs
and passwords. (See Chapter 4, "Restricting the Use
of the Machine.")
Department ID management function is turned 'OFF'.
Department ID management function is turned 'ON'. Set how
the use of the machine will be restricted.
Set the Department ID number from 00 to 99, and enter the
Department ID from 1 to 9999999. You cannot set the
Department ID and password to 0.
1-9999999
0-999999
0-999999
Select one of the registered sender names to be used as TX
terminal ID for the documents sent by the department.
For details about registering the sender names, see Chapter 1,
"Before You Start Using This Machine," in the Facsimile Guide .
Reset the counter.
System Settings 5-11
5