Canon Laser Class 700 Series Reference Manual page 141

5
Press [
Set
6
Press [
Set
If you do not want to set the PIN code access feature, select <OFF> © press
(Set) © proceed to step 9.
Set
7
If your PBX always requires PIN code entry, press [
Set
display <ON> © press [Set].
If your PBX requires PIN code entry depending on the destination, select <OFF>
before pressing
8
Press [
Set
NO.> © press [Set].
9
Stop
Press [Stop] to return to the Standby mode.
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
] until <7.PIN CODE> appears © press [Set].
M L
] or [
] to display <ON> © press [Set].
M L
] or [
(Set) © proceed to step 9.
Set
M L
] or [ ] to select <BEFORE TEL NO.> or <AFTER TEL
©
©
©
©
Setting Up and Using PIN Codes
4
M L
] or [ ] to
4-23