Dialing With A Pin Code Before The Number - Canon Laser Class 700 Series Reference Manual

Dialing with a PIN Code before the Number

If you set <NECESS. PIN CODE> of the PIN Code setting to 'OFF', you can
perform the procedure described below. (See "Setting a PIN Code," on p. 4-22.)
1
4
2
Pin Code
3
1 2 3
4 5 6
7 8 9
0
Set
4-26 Setting Up and Using PIN Codes
CF-PL Reference Guide_USEN HT1-2187-000-V.1.0
Place your documents on the machine.
For instructions explaining how to place your documents on the machine, see
Chapter 3, "Sending Documents," in the Facsimile Guide.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
Chapter 3, "Sending Documents," in the Facsimile Guide.)
• You can also specify a sender's name with [TTI Selector]. (See Chapter 3,
"Sending Documents," in the Facsimile Guide.)
Open all three one-touch speed dialing panels © press
[Pin Code].
Enter the telephone number using the numeric keys © press
[Set].
NOTE
Repeat steps 2 and 3 for each telephone number in a sequential broadcast. In a
sequential broadcast, you must dial the second destination within five seconds
of dialing the first destination. All subsequent destinations must be specified
within 10 seconds of each other. For details about sequential broadcasting, see
Chapter 3, "Sending Documents," in the Facsimile Guide.