Lexmark MS312 Service Manual page 58

2
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
3
Insert the tray.
4
From the printer control panel, select Next >
241 paper jam messages
Error code Description
241.01 Paper over tray 1 pass through sensor on warmup. Go to
241.02 Sensor (input) early arriving jam.
241.03 Tray 1 pass through sensor never became covered
when feeding a sheet from an option below.
241.06 Failed to feed from Tray 1. Exhausted all pick retries.
Paper present sensing indicates media is in the tray.
241.14 The media is late reaching the sensor (input) within
the specified time from tray 1.
241.15 Media tray 1, tray pulled jam.
241.16 The engine timed out waiting for the tray 1 to report
'ready' before the 1st pick attempt.
> Clear the jam, press OK >
Action
"Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Go to "Tray 1 jam service check" on page
Diagnostic information
58
.
60.
60.
60.
60.
60.
60.
60.
4514