Lexmark MS312 Service Manual page 46

Error code Description
200.09 Printhead did not receive proper motor feedback to
start laser servo.
200.10 Printhead motor not locked when media reaches the
input sensor.
200.11 Printhead motor fell out of lock after page reaches the
input sensor.
200.12 Printhead was not ready for media.
200.13 Media at input sensor is not the next media to be
imaged.
200.14 Media reached the input sensor before EP was ready. Go to
200.15 Input sensor covered too long. Source = [x].
200.16 Fuser motor stalled.
200.21 No response from paper port driver while waiting for
the source to deactivate the Input Source Ready flag
to indicate it has initiated picking.
200.23 Laser servo never started due to potential conflict
with the transfer servo.
200.24 Measured gap at input sensor too small to meet video
delivery requirements. (Not enough time since prior
image finished to start new image).
200.25 Input sensor covered too long. Source = [x].
200.29 Printhead drive control out of range due to an
external event beyond what the control is designed
to handle.
200.30 Invalid printhead NVRAM.
200.31 Paper, in the middle of a job, at input sensor before
interrupt occurred.
200.32 Detected cover switch bounce.
200.33 Input sensor covered too quickly.
200.38 Interpage servo gap smaller than expected for galvo
offset target evaluation.
200.42 Rogue sheet at ACM sensor while flushing the paper
path prior to declaring tray 1 source empty.
Action
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) image jam service check" on
page 49.
"Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Main drive motor control jam service check"
on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) image jam service check" on
page 49.
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Go to "Sensor (input) early/late arriving service
check" on page
Diagnostic information
46
48.
50.
48.
48.
48.
48.
48.
48.
48.
4514