Lexmark MS312 Service Manual page 45

7
Insert the imaging unit by aligning the arrows on the side rails of the unit with the arrows on the side rails inside
the printer, and then insert the imaging unit into the printer.
8
Insert the toner cartridge by aligning the side rails of the cartridge with the arrows on the side rails inside the printer,
and then insert the cartridge into the printer.
9
Close the front door.
10
From the printer control panel, press
200 paper jam messages
Error code Description
200.01 Input sensor covered during warm-up sequence.
200.02 Input sensor covered too quickly.
200.03 Page did not reach input sensor or was late reaching
input sensor, but was successfully picked from the
source.
200.05 Input sensor covered too long. Source = [x].
200.08 Page arrive at input senor at unexpected time.
to clear the message and continue printing.
Action
Go to
page 47.
Go to
check" on page
Go to
check" on page
Go to
check" on page
Go to
check" on page
Diagnostic information
45
"Sensor (input) static jam service check" on
"Sensor (input) early/late arriving service
48.
"Sensor (input) early/late arriving service
48.
"Sensor (input) early/late arriving service
48.
"Sensor (input) early/late arriving service
48.
4514