Piazzetta P960 Instructions For Installation, Use And Maintenance Manual page 32

Action
If there is a blackout while the stove is in operation, there are two
possibilities of procedure according to stove set-up:
- blackout without timer thermostat settings.
- blackout with timer thermostat settings.
Blackout without timer thermostat settings.
When the electricity supply is restored, the appliance restarts automatically.
• The grate cleaning phase activates.
• The fan operates at full speed to allow the stove to cool.
• The automatic stove restart cycle starts (the steps detailed in the
'STARTUP' phase are repeated automatically).
• Once the ignition cycle has been completed the stove operates normally
at power level 2 with Multifuoco on 2.
Blackout with timer thermostat settings.
There are 3 possible situations.
- Blackout straddling the time set for ignition: the stove does not restart.
- Blackout straddling the time set for shutdown: the stove restarts when
the electricity supply is restored.
- Blackout within the programmed operating time band: the stove restarts
when the electricity supply is restored.
Restarting is carried out with the same procedure as listed in "Blackout
without timer thermostat settings".
Action
If the glow plug is not working, the stove may be lit manually as follows:
- pour a small quantity of pellets into the grate;
- use a lit piece of solid firelighter (not liquid) to ignite the pellets;
- close the door;
- start the stove using the ON/OFF button.
a
This procedure is only to be carried out in an emergency while waiting for the servicing technician to arrive.
32
INTERRUPTION OF POWER SUPPLY
Description
EMERGENCY LIGHTING OF STOVE
Description
H07028100/DT2000970 – 01
Display
C L E A N I N G
1 2 : 0 0 7 3 F
1
DT2040061-05
Display
DT2040098-00