Seatback Adjustment - Pride Hurricane Owner's Manual

V I I .

SEATBACK ADJUSTMENT

The seatback may be positioned to four
different angles: 90°, 100°, 102° and
105°. See figure 16A.
To adjust the seatback angle:
1. Loosen and remove the adjustment
screw from the seatback hinge on
both sides of the seat.
2. Reposition the seatback to the desired
angle.
3. Align the adjustment holes from the
upper and lower hinge, so the adjust-
ment screw can easily pass through.
4. Reinsert both adjustment screws and
tighten.
POWER SEAT ACTUATOR (OPTIONAL)
Your Hurricane may be equipped with a power seat actuator, which raises and lowers the seat automatically. See
figure 17.
WARNING! The power seat mechanism is
intended for operation only while the vehicle
is stationary and on a level surface. Its
purpose is to aid you in reaching objects.
Strict adherence to the following safety rules
is vital to your safety: Do not attempt to raise
or lower the seat while in motion! Do not
operate your Hurricane with the power seat
elevated. It is recommended that the vehicle
be driven only with the seat in the lowest
position.
32
C O M F O R T A D J U S T M E N T S
UPPER HINGE
100° ADJUSTMENT HOLE
ADJUSTMENT SCREW
102° ADJUSTMENT HOLE
105° ADJUSTMENT HOLE
90° ADJUSTMENT HOLE
LOWER HINGE
FIGURE 16A. SEATBACK HINGE
FIGURE 17. POWER SEAT ACTUATOR
(OPTIONAL)
Hurricane