Seatback Adjustment - Pride Laser Owner's Manual

V I I I . C O M F O R T A D J U S T M E N T S

SEATBACK ADJUSTMENT

The seatback may be positioned to four differ-
ent angles: 90°, 100°, 102°, and 105°. See
figure 16A.
To adjust the seatback angle:
1. Loosen and remove the adjustment screw
from the seatback hinge on both sides of
the seat.
2. Reposition the seatback to the desired angle.
3. Align the adjustment holes from the upper
and lower hinge, so the adjustment screw
can easily pass through.
4. Reinsert both adjustment screws and tighten.
POWER SEAT ACTUATOR (OPTIONAL)
Your Laser may be equipped with a power seat actuator which
raises and lowers the seat automatically. See figure 17.
WARNING! The power seat mechanism is
intended for operation only while the vehicle
is stationary and on a level surface. Its
purpose is to aid you in reaching objects.
Strict adherence to the following safety rules
is vital to your safety: Do not attempt to raise
or lower the seat while in motion! Do not
operate your Sport Scooter with the power
seat elevated. It is recommended that the
vehicle be driven only with the seat in the
lowest position.
Laser
UPPER HINGE
100° ADJUSTMENT HOLE
ADJUSTMENT SCREW
102° ADJUSTMENT HOLE
105° ADJUSTMENT HOLE
90° ADJUSTMENT HOLE
LOWER HINGE
FIGURE 16A. SEATBACK HINGE
FIGURE 17. POWER SEAT ACTUATOR
(OPTIONAL)
SEAT ACTUATOR
27