Table of Contents
Advertisement
1 Stop playback.
REC LEVEL
+o
To stop fast tape winding
REC LEVEL
)
| |
;
™@ Zero-stop operation
This operation is not available from the remote control
unit.
Do
fA
a
REC LEVEL
+9
a
/
Press simultaneously.
Fast winding in
the = direction
Fast winding in
the = direction
To reset the counter
starting point of recording or playback.
C.RESET
@ Relay playback
This function plays back the tapes in both decks A and
B continuously and repeatedly.
1 Insert tapes.
2 Select the playback mode.
DIRECTION
The indication changes every
time the key is pressed.
peated.
... Relay playback of only one side of tapes in decks A and B is
repeated.
=
.-. Relay playback of both sides of tapes in decks A and B is re-
@
Relay playback cannot be performed if the DIRECTION
is set
to"C> ™.
3 Start playback.
REC LEVEL
to} |
@ The playback starts with the deck the play key of which is
pressed.
To stop playback
REC LEVEL
+6
Tape transport direction indicators
The
<4
indicators show the direction of tape transport in its
playback or recording.
The direction selected when
the tape
was stopped the last time is maintained even after the power is
turned off. When the tape is started automatically by the auto-
matic play operation, etc., the transport starts with the direction
shown
by the direction indicator.
If you want to change the
transport direction for the next time the power is trurned on,
press the play key of the opposite direction before turning pow-
er off.
HIGH
CCAS.
uss23 6a
dp sousce, A) WM Nid Il Wd
altel
AM a I Jat Mat
Deck A direction indicators
Deck B direction indicators
M-85/M-989 (En) 21
Advertisement
Table of Contents
