Dolby Pro Logic Set Up - Kenwood XD-DV9 Instruction Manual

48

Dolby Pro Logic Set up

Dolby Pro Logic setup must be performed to be able to
enjoy the excellent Dolby Pro Logic surround effect
fully.
1 Confirm that the Dolby Digital
indicator is not lit.
2 Press the LISTEN MODE key and
light up "PRO LOGIC" or
"3 STEREO".
3 Press the PRO LOGIC SET UP key.
4 Use the cursor left/right (2/3) key
to select the center speaker size,
then press the ENTER key.
5 Use the cursor left/right (2/3) key
to select the surround speakers,
then press the ENTER key.
6 Use the cursor left/right (2/3) key
to select the delay time of sur-
round speakers, then press the
ENTER key.
LISTEN
MODE
PRO LOGIC
SET UP
ENTER ENTER
ENTER ENTER
ENTER ENTER
When the Dolby Digital indicator is lit, switch to a
different disc or to TAPE.
Light up
or
"SELECT CENTER SPEAKER" will be displayed on the
display of the unit.
The steps 4 and 5 can be skipped when the
speaker size/existence has been set up with
SPEAKER SETUP of the SET UP MENU.
Each press switches the mode.
1 "NORMAL"
2 "NO"
3 "LARGE"
Each press switches the mode.
1 "YES"
2 "NO"
Each press switches the mode.
2 "20MS"
When the listening position is located be-
:
tween the front and surround speakers
3 "25MS"
4 "30MS" : When the listening position is closer to the
surround speakers
1 "15MS" :
When the listening position is closer to the
front speakers
Setting up surround mode
XD-DV9 (EN/T,M,X)
LISTEN MODE
PRO LOGIC
EX.BASS
DOLBY DIGITAL
PRO LOGIC
3 STEREO
DSP/EQ
3 STEREO
TAPE A TAPE B