Advertisement
DMX Address
Select DMX Address, press ENTER button to confirm, the present address will blink on the display. Use
UP and DOWN button to adjust the address from 1 to 512. Once the address has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button again. Hold
and press the MENU button about one second or wait for one minute to exit the menu mode.
Channel Mode
Select Channel Mode, press ENTER button to confirm, present mode will blink on the display. Use DOWN
and UP button to select the 15 Chan (15 Channel Mode) or 16 Chan (16 Channel Mode) mode. Once the
mode has been selected, press the ENTER button to setup, to go back to the functions without any change
press the MENU button again. Hold and press the MENU button about one second or wait for one minute to
exit the menu mode.
Show Mode
Select Show Mode, press ENTER button to confirm, present mode will blink on the display. Use DOWN
and UP button to select the Show 1 or Show 2 or Show 3 or Show 4 mode. Once the mode has been
selected, press the ENTER button to setup, to go back to the functions without any change press the
MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the
menu mode.
Split Color Mode
Select Split Color Mode, press ENTER button to confirm, present mode will blink on the display. Use
DOWN and UP button to select the Yes (Split Color mode) or No (normal) mode. Once the mode has been
selected, press the ENTER button to setup, to go back to the functions without any change press the
MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the
menu mode.
Slave Mode
Select Slave Mode, press ENTER button to confirm, present mode will blink on the display. Use DOWN
and UP button to select the Slave 1 (normal) or Slave 2 (2 light show) mode. Once the mode has been
selected, press the ENTER button to setup, to go back to the functions without any change press the
MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the
menu mode.
Black Out
Select Slave Mode, press ENTER button to confirm, present mode will blink on the display. Use DOWN
and UP button to select the Yes (yes blackout) or No (no blackout) mode. Once the mode has been
selected, press the ENTER button to setup, to go back to the functions without any change press the
MENU button again. Hold and press the MENU button about one second or wait for one minute to exit the
menu mode.
Sound State
Select Sound State, press ENTER button to confirm, present mode will blink on the display. Use DOWN
and UP button to select the On (sound on) or Off (sound off) mode. Once the mode has been selected,
press the ENTER button to setup, to go back to the functions without any change press the MENU button
again. Hold and press the MENU button about one second or wait for one minute to exit the menu mode.
6E
Hide quick links:
Advertisement
