Ethernet And Optical Sfp Modules - Cisco IR1101 User Manual

Product Overview
Pin Number
3
4
5
6
7
8

Ethernet and Optical SFP Modules

The IR1101 Ethernet and Optical SFP modules provide connections to other devices. These field-replaceable
transceiver modules provide the uplink interfaces. The Ethernet and Optical modules can be either copper or
optical. Details are in the two tables listed below.
The Local connectors (LCs) provide the fiber-optic connection. RJ-45 connectors allow copper connections.
You can use any combination of the supported SFP modules listed in the table that follows.
Note
The IR1101 is designed to operate in the Industrial temperature range (-40C to +85C internal component
temperature range) and therefore cannot support commercial rated SFPs.
Table 12: Supported Gigabit SFPs
GE SFP Distance
GLC-SX-MM-RGD 220-550 m
GLC-LX-SM-RGD 550m/10 km
GLC-ZX-SM-RGD 70 km
SFP-GE-S 220-550 m
SFP-GE-L 550 m/10 km
SFP-GE-Z 70 km
Description
DTE Ready
Signal Ground
Received Data
Transmitted Data
Clear To Send
Request To Send
Fiber
MMF
MMF/SMF
SMF
MMF
MMF/SMF
SMF
Abbreviation
DTR
COM
RxD
TxD
CTS
RTS
Commercial Extended
0C to +70C -5C to
+85C
YES
YES
YES
Ethernet and Optical SFP Modules
DTE
—>
<—
—>
<—
—>
Industrial DOM
-40C to
+85C
YES
YES
YES YES
YES
YES
YES
Product Overview
19