Basic Operations; Mode Button (Mode) - AEG CS MP 850 BT Instruction Manual

7. BASIC OPERATIONS

3) PANEL RELEASE BUTTON (REL)
Press this button to remove the control panel.
1) POWER ON/OFF BUTTON (
Press POWER button or any other button on the front of the radio (except Open/Eject) to
turn the unit on. Press POWER button again to turn the unit off.
23) MUTE BUTTON (MUTE)
Press the mute button momentarily to mute the audio volume, and "Mute" will flash in the
display. Press the mute button again to restore volume to the previous setting.
8) SUB-WOOFER (SUB-W)
Long press the SUB-W button to activate the Sub-woofer function On, and "Sub-woofer"
will appear on the LCD display for 3 seconds. press the SUB-W button again to turn off the
Sub-woofer function.
Please refer to the related description in "Audio Operation of Sub-woofer"
for details operation of the Sub-woofer control !
The Subwoofer Level and Low Pass Filter control will only appear in the Audio Menu
only if the Subwoofer function is currently activated 'On".
10) iX-BASS BUTTON (iX-Bass )
Long press the iX-Bass button to turn on the IX-Bass function, and "iX-Bass" will appear in
the LCD display for 3 seconds. Press the iX-Bass button again to turn off the IX-Bass
function
Please refer to the related description in "Audio Operation of iX-Bass" for details
operation of iX-Bass control !
The IX-Bass Boost Level control will only appear in the Audio Menu only if the iX-Bass
function is currently activated 'On".

5) MODE BUTTON (MODE)

Press MODE button to select a different mode of operation as indicated on the display
panel. Available modes include Tuner , CDP , USB Host, SD/MMC.
6) ENCODER VOLUME BUTTON
To increase the volume, rotate the volume control clockwise. T o decrease the volume,
rotate the volume control counter clockwise.When volume is adjusted, the volume level will
be shown on the display panel as a number ranging from 0 (lowest) to 46 (highest).
18) DISPLAY (D)
Press DISPLAY/MENU momentarily to navigate through the following Display , and back to
the default display. The selected display mode will appear in the LCD when the unit is
turned on.
Default Display
)
E - 8
EQ Animation