Answering An Incoming Call - AEG CS MP 850 BT Instruction Manual

The unit will be Auto Re-Connection by following operation .
Every time turn the ignition key from off to on ,the unit will Auto re-connect with the mobile
phone one.
Every time when user long press AUDIO button or short press MODE button confirm
dialing a call, the Unit will Auto Re-connect with the Mobile Phone once ( Only if this Mobile
Phone has been paired with the unit previously ).
Dis-Connection of the Blue Tooth System
The unit have a option function for user to disconnect the Blue tooth system with the unit.
The unit can be Dis-connected by the following methods.
Access into MENU - DIS-CONN mode to activate the manual Dis-Connection.
Pls see MENU Operation for more details of how to access into MENU mode.
Once the "
manual Dis-Connect mode.
The LCD Display will displayed "
If the Dis-Connection is successful, the LCD Display will display "
the unit will switch back to the previous mode automatically.
INCOMING CALL

ANSWERING AN INCOMING CALL

When there is an incoming call, the LCD Display will dis play "Caller ID" and keep blinking.
If the incoming call has no caller ID, the LCD will display "
press the "PHONE" button or "MODE" button to answer / accept the call.
Always press the "PHONE" (AUIDIO)button or "MODE ' button to answer / accept the
call after the LCD display the "Caller ID" or "PHONE IN".
The audio output of the present mode will be muted and the ringing tones will be heard,
if an incoming call is not being answered.
User can use the volume up/down to adjust the volume level.
To end the conversation, press the "CLEAR" button. The unit will switch back to the
previous mode automatically and release the mute of the previous mode at the same time.
An incoming call under stand by mode (Ignition on & Power Off) The system will
automatically switch on the head unit.
While there is an Incoming call or under talking mode, the Panel Open/Eject key is dis-
activated.
Rejecting An Incoming Call
User can press "CLEAR" button to reject the incoming call.
The audio output of the present mode will be muted and the ringing tones will be heard
if an incoming call is not being answered. After pressing the "CLEAR"(BAND) button,
the mute of the present mode will be released.
" is display on the LCD, press the AUDIO button to activate the
E - 36
" during the Dis-connecting period.
". And
" User can