Enabling And Disabling Parksense - Jeep 2014 Cherokee Owner's Manual

238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Enabling And Disabling ParkSense®
ParkSense® can be enabled and disabled with the
ParkSense® switch, located on the switch panel below
the Uconnect® display.
ParkSense® Switch
When the ParkSense® switch is pressed to disable the
system, the instrument cluster will display the
"PARKSENSE OFF" message for approximately five sec-
onds. Refer to "Electronic Vehicle Information Center
(EVIC)" in "Understanding Your Instrument Panel" for
further information. When the shift lever is moved to
REVERSE and the system is disabled, the EVIC will
display the "PARKSENSE OFF" message for as long as
the vehicle is in REVERSE.
The ParkSense® switch LED will be ON when
ParkSense® is disabled or requires service. The
ParkSense® switch LED will be OFF when the system is
enabled. If the ParkSense® switch is pressed, and re-
quires service, the ParkSense® switch LED will blink
momentarily, and then the LED will be ON.