Jeep 2014 Cherokee Owner's Manual page 388

386 UNDERSTANDING YOUR INSTRUMENT PANEL
NOTE: Keep magnetic materials away from the top of the
instrument panel, such as iPod's, Mobile Phones, Laptop
Computers and Radar Detectors. This is where the com-
pass module is located, and it can cause interference with
the compass sensor, and it may give false readings.
Compass Variance Map
• Perform Compass Calibration
Push the "Calibration" button on the touchscreen to
change this setting. This compass is self-calibrating,
which eliminates the need to manually reset the compass.
When the vehicle is new, the compass may appear erratic
and it may need to be calibrated. You may also calibrate
the compass by pushing the "ON" button on the touch-
screen and completing one or more 360-degree turns
(in an area free from large metal or metallic objects) until
the CAL indicator displayed in the EVIC turns off. The
compass will now function normally.
Audio
After touching the "Audio" soft-key the following set-
tings will be available.
• Balance/Fade
When in this display you may adjust the Balance and
Fade settings.