Jeep 2014 Cherokee Owner's Manual page 259

Hide thumbs Also See for 2014 Cherokee:
Table of Contents

Advertisement

• When you move the shift lever to the REVERSE
position and ParkSense® is turned off, the instrument
cluster will display "PARKSENSE OFF" for as long as
the vehicle is in REVERSE.
• ParkSense®, when on, will reduce the volume of the
radio when it is sounding a tone.
• Clean the ParkSense® sensors regularly, taking care
not to scratch or damage them. The sensors must not
be covered with ice, snow, slush, mud, dirt or debris.
Failure to do so can result in the system not working
properly. The ParkSense® system might not detect an
obstacle behind or in front of the fascia/bumper, or it
could provide a false indication that an obstacle is
behind or in front of the fascia/bumper.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257
• Use the ParkSense® switch to turn the ParkSense®
system off if objects such as bicycle carriers, trailer
hitches, etc. are placed within 12 in (30 cm) from the
rear fascia/bumper. Failure to do so can result in the
system misinterpreting a close object as a sensor
problem, causing the "PARKSENSE UNAVAILABLE
SERVICE REQUIRED" message to be displayed in the
instrument cluster.
• ParkSense® should be disabled when the liftgate is in
the open position. An opened liftgate could provide a
false indication that an obstacle is behind the vehicle.
• There may be a delay in the object detection rate if the
object is moving. This will cause the automatic braking
application to be delayed.
3

Advertisement

Table of Contents
loading

Table of Contents