Wheel And Tire Torque Specifications; Torque Specifications - Jeep 2014 Cherokee Owner's Manual

Hide thumbs Also See for 2014 Cherokee:

Table of Contents

554 WHAT TO DO IN EMERGENCIES

NOTE: There are steps that you can take to slow down

an impending overheat condition:

• If your air conditioner (A/C) is on, turn it off. The A/C

system adds heat to the engine cooling system and

turning the A/C off can help remove this heat.

• You can also turn the temperature control to maximum

heat, the mode control to floor and the blower control

to high. This allows the heater core to act as a

supplement to the radiator and aids in removing heat

from the engine cooling system.

You or others can be badly burned by hot engine

coolant (antifreeze) or steam from your radiator. If

you see or hear steam coming from under the hood,

do not open the hood until the radiator has had time

to cool. Never try to open a cooling system pressure

cap when the radiator or coolant bottle is hot.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure

that the wheel is properly mounted to the vehicle. Any

time a wheel has been removed and reinstalled on the

vehicle the lug nuts/bolts should be torqued using a

properly calibrated torque wrench.

Lug Nut/Bolt

**Use only Chrysler recommended lug nuts/bolts and

clean or remove any dirt or oil before tightening.

Lug Nut/Bolt

Table of Contents