Page 1
HT-150 Owner’s Manual 1 x 5 HDMI to HDBaseT Distribution Amplifier PureLink 535 East Crescent Avenue Ramsey, NJ 07446 Tel: +1.201.488.3232 Fax: +1.201.621.6118 E-mail: sales@purelinkav.com www.purelinkav.com For order support, please contact your local dealer. For technical support, please contact us at...
PureLink by Dtrovision Chapter 1. Product Overview 1.1 Safety Precautions All safety instructions should be read and understood before the unit is operated. The owner’s manual and safety instructions should be retained for future reference. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth only.
HT-150 extends HD audio, video and IR control signals up to 330ft over a CATx cable. A dedicated IC chipset makes HT-150 capable of amplifying and distributing highest quality of video signal and true HD digital contents.
Page 5
PureLink by Dtrovision TWC6 (PureLink’s certified CATx cable with TotalWire Technology) PI (PureLink’s PureInstall HDMI cable with TotalWire Technology) 1.5 Product application notes Figure 1 – Schematic Connection Diagram of HT-150...
Page 6
PureLink by Dtrovision Figure 2 – Schematic Connection Diagram of HT-150 Figure 3 – Schematic Connection Diagram of HT-150...
* for detail specification information about HCE II Rx and HTR Rx, please go to pg 9-11. Caution : HT-150 is not designed to work in a network environment, do not connect it to network to avoid damage Do not place IR transmitter near from IR receiver to avoid mutual interference ...
HT-150 provides Auto EDID management system to meet today’s sophisticated digital connectivity integration environment. There is an EDID setting DIP switch on the back of the unit;...
Page 9
HT-150 (ex. Blu ray player). * Please note that HT-150 can only send same IR commands to all outputs. If more than one of the displays Share the same IR codes, they will react to the commands simultaneously. To avoid this, please use different brands or models of the displays.
PureLink by Dtrovision Chapter 2. Product Specifications 2.1 HT-150 Specification Item Description Model HT-150 HDMI, 1 port Input type IR, 1 port HDMI, 1 port Output type CATx, 4 ports IR, 1 port VGA / SVGA / XGA / UXGA / WUXGA...
Page 11
PureLink by Dtrovision CATx (HDBaseT), 1 port Input type IR, 1 port HDMI, 1 port Output type IR, 1 port VGA / SVGA / XGA / UXGA / WUXGA Graphic Resolution 480i/p , 720i/p , 1080i/p HDBaseT Distance 230ft (70m) with HCE II Rx...
PureLink by Dtrovision 2.3 HTR Rx Specification Item Description Model HTR Rx CATx (HDBaseT), 1 port Input type IR, 1 port Toslink optical in, 1 port HDMI, 1 port IR, 1 port Output type RS232, 1 port (bi-direction) Ethernet, 1 port (bi-direction)
3.5” x 4.7” x 1.2” (88.0 x 120.0 x 30.0 mm) Weight 0.62 lbs (0.28 kg) Some of HTR’s features (RS232, Ethernet, and ARC) are not designed to use with HT-150. 2.4 HDMI Receptacle Pin Assignment HDMI Connector Pin Assignment...
TMDS Clock + 2.5 CATx (HDBaseT) cable Termination HT-150 is designed based on TIA/EIA-566-B Standard. Please ensure that each PIN layout of the cable is corresponding with the picture below before connecting the cable. Please note that CAT5e or above level cable enables to deliver better quality and longer distance.
The maximum transmission distance up to 330ft (100m), use lower resolution won’t extend longer than 330ft (100m). If connection through the wall socket, the cable length must be less than 16ft (5m) between HT-150, HDBaseT extender receiver and wall jack, as below drawing:...
PureLink by Dtrovision : Power On/Off indication (Green LED) : HDMI input signal On/Off indication (Blue LED) OUT 1 – 5 : Output signal On/Off indication (Blue LED) Rear Panel : IR Tx : IR port to send IR control signals to CATx (HDBaseT) outputs to remote location AV devices...
PureLink by Dtrovision The display shows only black screen. - Ensure that all plugs and jacks used by external power supplies (both PureLink product and others) are firmly connected. Ensure the all LEDs are ON. - Ensure that the HDMI ports are firmly plugged in to the source and display.
Repaired or replacement products or parts come with a 90-day warranty or the remainder of the warranty period. PureLink shall not be responsible for any software, firmware, information, or memory data loss of contained in, stored on, or integrated with any products returned to PureLink for repair under warranty. 3.2 Customer Service Any customer service inquiries can be submitted electronically through the Q&A form on our website...
Need help?
Do you have a question about the HT-150 and is the answer not in the manual?
Questions and answers