Miele h 6800 bp Operating And Installation Instructions page 135

Problem
"Door not locked"
appears in the display.
"Door not released"
appears in the display.
The message "No signal
to food probe.
Reposition food probe
in the oven" appears in
the display.
The message "Function
currently not available"
appears in the display
after selecting the
"Descale" function.
Possible cause and remedy
The Pyrolytic cleaning programme door lock is not
locking.
^ Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.
If the fault code appears in the display again call the
Miele Service Department.
The door lock for the Pyrolytic cleaning programme is
not being released.
^ Switch the oven off and then back on again.
If the door lock still does not release itself call the Miele
Service Department.
The food probe is no longer recognised by the oven.
^ Reposition the food probe in the food.
If the oven still does not recognise the food probe it
must be faulty.
A replacement food probe can be ordered from Miele
or from your Miele dealer.
The steam injection system is faulty.
^ Call the Miele Service Department.
Problem solving guide
135