Web Interface - Patton OnSite 3300 Quick Start Manual

port ethernet 0 0
bind switch-group DEFAULT ETHERNET_0_0
no shutdown
port ethernet 0 1
bind switch-group DEFAULT ETHERNET_0_1
no shutdown
port ethernet 0 2
bind switch-group DEFAULT ETHERNET_0_2
no shutdown
port ethernet 0 3
bind switch-group DEFAULT ETHERNET_0_3
no shutdown
port dsl 0 0
service-mode 8-wire
mode cpe
bind bridge-group LAN
no shutdown
mtu 1522
The OS3300 provides a browser interface that allows you to configure and manage the EFM Router. After you set
up the IP address for the OS3300, you can access the Web interface applications directly in your Web browser by
entering the configured IP address. You can then use your Web browser to list and manage configuration param-
eters from a PC.
Earlier versions predating Internet Explorer 9.0 browser are not compatible with the OS3300.
Note
4.1 Connect with Web GUI
1. Connect the Ethernet cable.
2. Connect the power supply.
3. Connect via web browser to the default address 192.168.200.10 O
4. Login with the default username admin without a password.
5. Use current updated version of your favorite browser.
Once the network connection is established, you will be able to reach the OS3300 Web GUI. Login to the Web GUI
using the following credentials below:
username: admin
•
password: [blank]
•
OnSite 3300 Quick Start Guide

4.0 Web Interface

Port
Any physical port of the Patton Device
15