Patton OnSite 3300 Quick Start Manual page 12

port ethernet 0 0
bind switch-group DEFAULT ETHERNET_0_0
no shutdown
port ethernet 0 1
bind switch-group DEFAULT ETHERNET_0_1
no shutdown
port ethernet 0 2
bind switch-group DEFAULT ETHERNET_0_2
no shutdown
port ethernet 0 3
bind switch-group DEFAULT ETHERNET_0_3
no shutdown
port dsl 0 0
mode cpe
bind interface ROUTER DSL
service-mode 8-wire
no shutdown
Context IP
DSL IP is set for DHCP CLIENT
•
Profile NAPT for EFM Router CO Traffic
•
Bridge Group IP set for LAN Network Management
•
Context Bridge Group
Collect all Ethernet ports into Switch Address
•
Context Switch Group
Bind all Ethernet ports directly into 4 Port Switch
•
3.8 Conceptual View
Below you will see a conceptual view of basic OS3300 configuration concepts. _You can see contexts, interfaces,
ports, bindings, profiles and use commands._ A context represents one specific networking technology or proto-
col. These are bound together to offer a highly flexible multi functioning multi-service network device.
12
Port
Any physical port of the Patton Device
OnSite 3300 Quick Start Guide