Disassembly Method - JVC KS-LX200R Service Manual

Disassembly method

Removing the top chassis
1. Remove the two screws A attaching the bottom
cover to the top chassis on the bottom of the body.
2. Remove the two screws B attaching the top chassis
on both sides of the body.
3. Remove the screw C and the three screws D
attaching the heat sink on the left side of the body.
4. Remove the two screws E and the screw F on the
back of the body.
5. Remove the two screws G on the upper side of the
body.
6. Move the top chassis upward and disconnect the
cassette mechanism connector from the main board
connector by pulling it. Remove the top chassis from
the body.
G
(See Fig.1 to 5)
Top chassis
G
Fig.5
A
C
Heat sink
D
E
KS-LX200R
Bottom cover
A
Fig.1
Top chassis
B
Fig.2
Top chassis
B
Fig.3
F
Fig.4
1-3