Dab Tuner Operations; Tuning Into An Ensemble And One Of The Services - JVC KS-LX200R Service Manual

DAB TUNER OPERATIONS

We recommend that you use DAB (Digital Audio
Broadcasting) tuner KT-DB1500 with your unit.
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
• Refer also to the Instructions supplied with your
DAB tuner.
What is DAB system?
DAB is one of the digital radio broadcasting
systems available today. It can deliver CD quality
sound without any annoying interference and
signal distortion. Furthermore, it can carry text,
pictures and data.
In contrast to FM broadcast, where each
programme is transmitted on its own frequency,
DAB combines several programmes (called
"services") to form one "ensemble."
With the DAB tuner connected with this unit,
you can enjoy these DAB services.
30
BAND
SCM MONO LOCAL MODE TP
SEL A TT S DISP SOURCE RDS
7 8 9
S
M
Tuning into an ensemble and
one of the services
A typical ensemble has 6 or more programmes
(services) broadcast at the same time. After tuning
into an ensemble, you can select a service you
want to listen to.
1
2
3
INT RPT RND
PTY OFF
10 11 12
R
Select the DAB tuner (DAB1–3).
• Press and hold SOURCE (BAND)
repeatedly to select the DAB band number
(DAB1, DAB2 or DAB3.)
Note:
This receiver has three DAB bands (DAB1,
DAB2, DAB3.) You can use any of them to tune
into an ensemble.
Start searching an ensemble.
¢ to search
Press
ensembles of higher frequencies.
Press 4
ensembles of lower frequencies.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
Select a service you want to listen to.
1 Press MODE ATT.
"MODE" appears on the display.
2 Press
select a service you want, while
"MODE" is still on the display.
0
to search
¢ or 4
to