JVC KS-LX200R Service Manual page 11

Removing the sub motor
Prior to performing the following procedure, remove
the connector board and the load arm assembly.
1. Remove the slit washer j and the worm gear.
2. Remove the two screws F.
Removing the play head / pinch roller
assembly (twin set) (See Fig.7)
Prior to performing the following procedure, remove
the connector board, the load arm assembly and the
sub chassis.
1. Remove the spring K
assembly and pull out the play head assembly.
2. Remove the two screws G.
3. Remove the two slit washers l attaching the pinch
roller assembly (twin set). Pull out each pinch roller
assembly.
(See Fig.4 and 6)
retaining the play head
Sub motor
F
Pinch roller assembly
l
Slit washer Play head
k
Spring
Spring
KS-LX200R
j
Slit washer
Worm gear
Fig.6
Pinch roller assembly
Slit washer
G
k
Fig.7
l
1-11