Other Convenient Tape Functions - JVC KS-LX200R Service Manual

Cassette receiver
Hide thumbs Also See for KS-LX200R:
Table of Contents

Advertisement

Other convenient tape functions

Skipping the blank portions on the tape
You can skip blank portions between the tunes
(Blank Skip).
When this function is on, the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
• See also "Changing the general settings (PSM)"
on page 21.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 22.)
2
¢ or 4
Press
"B. SKIP" (blank skip).
.
3
Press + to select "ON."
Now Blank Skip is activated.
4
Press SEL (select) to finish the setting.
To cancel Blank Skip, repeat the same procedure
and select "OFF" in step 3 by pressing –.
Playing the current tune repeatedly
You can play the current tune repeatedly (Repeat
Play).
1
2
to select
Note:
• In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
– The Dolby NR setting does not match. For example,
if Dolby B NR is on and the tape was recorded with
no Dolby NR.
Press MODE ATT while playing a
tape.
"MODE" appears on the display.
Press RPT while "MODE" is still on
the display so that the RPT indicator
lights up on the display.
Each time you briefly press the
button, Repeat Play turns on and
off alternately.
Lights up when Repeat Play is turned on.
17

Advertisement

Table of Contents
loading

Table of Contents