Disassembly method
Removing the front panel assembly
1.
Remove the four screws A
body.
2.
Release four joints a on both sides of the body using
a screwdriver and remove the front panel assembly
toward the front. The connector which connects the
front panel assembly with the rear section comes off.
CAUTION:
When reassembling, make sure that
connector CN501 on the front panel
assembly is securely connected to
CN701 on the main board (See Fig.3).
(See Fig.1 ~ 3)
on both sides of the
CN501
Front panel assembly
Fig.3
Fig.1
Joint a
A
A
Joint a
Front panel assembly
Fig.2
CN701
KW-XC828
Joint a
A
A
Joint a
Front panel assembly
1-3