JVC KS-LX200R Service Manual page 9

Disassembly method
<Cassette mechanism assembly>
Removing the head amplifier board
1. Disconnect the wire from connector CP401 on the
head amplifier board.
2. Remove the screw A.
3. Remove the head amplifier board in the direction of
the arrow to unhook two joints a.
4. Disconnect connector CP402 on the head amplifier
board from the connector board.
Removing the mechanism bracket
Prior to performing the following procedure, remove
the head amplifier board.
1. Remove the four screws B on the underside of the
cassette mechanism assembly.
<Cassette mechanism>
Prior to performing the following procedure, remove
the head amplifier board and the mechanism
bracket.
Removing the connector board
1. Unsolder soldering b and c on the connector board.
2. Remove the three screws C.
3. Remove the connector board in the direction of the
arrow to unhook joint d.
Connector board
(See Fig.1)
(See Fig.2)
(See Fig.3)
Head amplifier board
A
a
Joints
Fig.1
B
Mechanism bracket
B
Fig.2
b
Soldering
C
Joint
C
Connector board
C
c
Soldering
Fig.3
KS-LX200R
B
d
1-9