Setup For Surround Play (While Listening To Music) - Kenwood C-V351 Instruction Manual

The setup for surround play can also be performed by
listening to actual music instead of the test tone.
Use the following procedure to adjust surround play while
listening to music.
Preparations
÷ Play video software marked
Setup for surround play
1
Select the Dolby Pro Logic surround mode.
RC
PRO LOGIC
2
Adjust the adjustment item (example).
RC
When "Tone/Balance" is selected.
MODE
If no key on the main unit has been pressed for about 5 seconds, the
display on the main unit disappears and it returns to the status
before the setup mode was entered.
The display on the GRC disappears if no key on the GRC has been
pressed for about 10 seconds.
GRC
When "Tone/Balance" is selected.
Setup Tone/Balance
Bass
+8dB
Treble -8dB
+
L 7
|||||||||| ||||||||||
When "Speaker Level" is selected.
Setup Speaker Level
Center Sub W
+10dB
Surr.L Surr.R
-10dB
.
(while listening to music)
GRC
ENTER
PRO LOGIC
ENTER
GRC
Set Up
ENTER
Sound
ENTER
Tone/Balance
ENTER
R
-20dB
-5dB
Speaker Level
Main operation menu
÷ Select the surround mode according to the played source and compo-
nent in use.
÷ Switching is not possible when the 6ch INPUT is used.
RC/Main unit
Each press switches the adjustment items as shown below.
1 BASS
:Tone, Bass
2 TREBLE
:Tone, Treble
3 L- - - - - - -R :Balance
4 C ch
:Center speaker
5 SR ch
:Surround speaker, Right
6 SL ch
:Surround speaker, Left
7 SW ch
:Subwoofer
8 DELAY
:Delay time
9 INPUT
:Input level
÷ Adjustment items 5, 6 and 8 are not required in the 3 STEREO mode.
÷ With the GRC, the adjustment items shown in a single menu can be
adjusted at once. (The adjustment steps 1, 2 and 3 or steps 4, 5,
6 and 7 are provided in a single menu so they can be adjusted
successively without changing the menu screen.)
When "Input Level" is selected.
Setup Sound
Test Tone DSP
Delay Time
Tone/
Balance
Speaker Level
Input Level -6dB
When "Delay Time" is selected.
Setup Delay Time
Delay Time Delay Time
20msec 20msec
Ambience effects
C-V351/C-V301 (EN)
Setup Sound
Test Tone DSP
Delay Time
Tone/
Balance
Input Level -6dB
39