To Listen Through Headphones - Kenwood C-V351 Instruction Manual

24
Source Direct playback
This feature allows you to play the source signal with a high quality by
passing it only through the minimum required circuitry.
RC
1 Select the playback source.
INPUT
2 Select SOURCE DIRECT.
SOURCE
DIRECT
3 Playback the source.

To listen through headphones

1 Plug headphones.
AV CONTROL CERTER KC-2
2 Adjust the volume.
RC
To increase volume
%
VOLUME
fi
To decrease volume
To mute sound temporarily
RC
MUTE
GRC
Main
Menu
ENTER
C D
ENTER
ENTER
Source
Direct
ENTER
PHONES
GRC
To increase volume
VOLUME
To decrease volume
GRC
MUTE
C D
÷ During Source Direct playback, the tone controls (BASS and TREBLE)
and balance control are defeated.
÷ The Source Direct playback is canceled when any key associated with
the surround play is pressed.
÷ The Source Direct playback is not possible when the 6ch INPUT is selected.
To cancel
Select the Source Direct (S.DIRECT) again.
÷ The speaker sound is defeated at the moment headphones are
inserted into the PHONES jack.
÷ If headphones are plugged in during surround play, its mode is
automatically switched to the STEREO mode.
If they are plugged in during 6ch INPUT play, only the front L ch and R
ch will be played.
The previous status resumes at the moment headphones are un-
plugged.
÷ If headphones are plugged in during test tone output, the test tone
output stops.
MUTE
Blinks
To cancel
Press the MUTE key again.
Sound adjustment functions
C-V351/C-V301 (EN)
Lights up
SOURCE
DIRECT
Goes off
SOURCE
DIRECT