Controlling The Components Connected Through System Control Cords - Kenwood C-V351 Instruction Manual

Controlling the components connected through system control cords

When a CD player, cassette deck and/or LD player are
connected with the AV CONTROL CENTER through system
control cords, their system control operations are possible
from the GRC.
Preparations
÷ System control connection
÷ Model Type Setup
÷ Setup of source components
Operating the tuner
1 Select the "Tuner" input.
2 Display the tuner operation
menu.
3 Select the icon to be operated.
4 Enter the selection
(by pressing the "ENTER"
key).
Operating the CD player
1 Select the "CD" input.
2 Display the CD operation menu.
3 Select the icon to be operated.
4 Enter the selection
(by pressing the "ENTER"
key).
7
@
#
Main
Menu
ENTER
Tuner
ENTER
Tuner
ENTER
Tuner
100.00 P.Call
fm MHz
01ch
Auto Band
Memory /
10key Pad
RDS
ENTER
Main
Menu
ENTER
C D
ENTER
CD
ENTER
CD
Track 01
10key
Pad
Mode
ENTER
Remote control of components from the GRC
Return
Main operation menu
÷ Any of the keys which can control the tuner can be selected.
÷ Any of the CD player operation keys can be selected.
÷ The menu display shown on the left is an example which appears with
a single CD player.
÷ For the operation of the CD player, also read the instruction manual of
the CD player.
For C-V351
C-V351/C-V301 (EN)
ENTER
Input
Main Menu
CD Tuner LD Tape1 TapeA Source
Set Up Confirm
Cable Sat. TV VCR1 VCR2 TapeB
Main Menu 1
C D VCR Tape1 / MD
Tuner AUX
MUTE
LD / DVD
6ch Input
ON/STANDBY
17
VOLUME