Operation Mode Setting - TP-Link TL-WA5210G Installation Manual

Operation Mode Setting

This page will then display.
Click Next
Choose the Operation Mode Type
appropriate to your needs
Click Next
The AP supports three operation mode types: AP Client Router, A P Route r
Note
and AP.
a) If you want to connect to your WISP, please choose A P Client Route r
mode and proceed to A
b) If you want to set it as a router, please choose AP Router mode, and fo r
further configuration, please refer to the user guide in the resource CD;
c) If you want to set up a point-to-point connection with TL-WA5210G,
please skip to B;
If you want to set it as a repeater, please skip to C.
A. Configuration for AP Client Router Mode
This page will then display.
Choose your WAN Connection
Type provided by your WISP. Here
we choose PPPoE as an example
Click Next
Enter the Username and Password
given by your WISP
Click Next
Note
The Username and Password are provided by your WISP.
5
2