Checking Accessories; Fcc Notice - Remotec ZTS-100 User Manual

Z-Wave Command Class
COMMAND_CLASS_THERMOSTAT_FAN_MODE
COMMAND_CLASS_THERMOSTAT_FAN_STATE
COMMAND_CLASS_THERMOSTAT_MODE
COMMAND_CLASS_THERMOSTAT_SETPOINT
COMMAND_CLASS_THERMOSTAT_OPERATING_STATE
COMMAND_CLASS_THERMOSTAT_SETBACK
COMMAND_CLASS_SENSOR_MULTILEVEL
COMMAND_CLASS_CLOCK
COMMAND_CLASS_BATTERY
COMMAND_CLASS_BASIC
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_CONFIGURATION

Checking Accessories

After opening the cover of the packaging box, check that the following accessories
are included.
- ZTS-100: Z-Thermostat
- Screw + Wall Anchor x 4pcs
- User Manual

FCC Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Controlled Supported
30
NO YES
NO YES
NO YES
NO YES
NO YES
NO YES
NO YES
NO YES
NO YES
YES YES
NO YES
NO YES
NO YES
NO YES