Table of Contents
Advertisement
Introduction
Welcome to the Z-Wave world of home automation, your ZTS-100 Z-Thermostat
(Figure 1) is a comfort control master that allows to control your room temperature
with programmable time schedule WAKE, AWAY, HOME and SLEEP event which
can maximize energy conservation and comfort while minimizing the effort required
to maintain the appropriate temperature in your home whether you are at home or
away.
Also, it can be utilized to control / check your room temperature by the smart
phone or PC while you are at office, home anywhere or around the world which
can go through the Z-Wave gateway control.
ZTS-100 can be configured as either "Frequently Listening Routing Slaves"
(FLiRS) or "Always Listening" node and it will distinguish the power source
(batteries or 24Vac) automatically and switch to appropriate mode during inclusion
stage.
FLiRS node type is targeted for battery operated applications and will enter sleep
mode frequently in order to conserve battery consumption that can provide
flexibility if there is out of 24Vac power line.
Always Listening node type is targeted for AC power operated applications and it
can act as a repeater, which will re-transmit the RF signal to ensure that the signal
is received by its intended destination by routing the signal around obstacle and
radio dead spots.
Figure 1. ZTS-100
ZTS-100 Z-Thermostat
MO
WAKE
AM
PROG ON
FAN ON
1
HEAT
2
Hide quick links:
Advertisement
Table of Contents
