Remotec ZTS-100 User Manual page 29

COOL Mode: thermostat controls the temperature according to the following diagram
Output
Turn off
Off
Example for Cooling: (Set point = 80 F, Swing = 1 F)
=> Cooler turns on when room temp is 81 F and off at 79 F.
AUTO: thermostat controls the temperature according to the following diagram
Output
nd
2 Turn on
1 Turn on
Off
There is a dead band 4 F/2 C between heat set point and cool set point.
Example 1: If user select heat set point is 70F, the minimum cool set point will be
limited at "heat set point" + 4 F: 74 F
Pervious heat set point is 70 F and cool set point is 74 F
Example 2: If user changes heat set point to 72 F, cool set point will be updated to
o
76 F automatically to maintain the dead band.
Set point
Swing
Heat Set point
2 Turn off
st
Diff Swing
o o
o
Turn on
o o
o
nd
st
1 Turn off
Dead band
o o
o
o
28
Cool
Temperature
o
Cool Set point
Heat
Temperature
Swing