Z-Wave Add (Inclusion) / Delete (Exclusion) Mode - Remotec ZTS-100 User Manual

Step Procedure / Description
Press "Prog" key once to confirm the
setting and it will go to target setting.
If the event is enabled, it will go to target
setting.
6
Target will keep flashing, press Up/Down
key to adjust Heat set point for heating.
If the event is disabled, it will go to next
event setting.
Press "Prog" key once to confirm the
setting and it will go to target setting.
7
Target will keep flashing, press Up/Down
key to adjust Cool set point for cooling.
Press "Prog" key once to confirm the
setting and it will go to next event mode.
8
Follow the program UI to complete the
whole scheduling or press Home key
once to save and exit.

Z-Wave Add (Inclusion) / Delete (Exclusion) Mode

Symbol Inclusion and Exclusion Mode Key Description
N/A
N/A
N/A
N/A
Add (Inclusion) / Delete (Exclusion)
Back to Home
18
LCD indication
MO TU WE TH FR WAKE
AM
TARGET
MO TU WE TH FR WAKE
AM
TARGET
HEAT
COOL