Digital Watchdog MEGApix DWC-MF21M4TIR Manual page 15

IP FINDER SOFTWARE*
U s i n g I P F i n d e r S o f t w a r e
U s e I P F i n d e r t o s e t t h e c o n n e c t i o n t y p e a n d t h e I P a d d r e s s i n f o r m a t i o n
f o r y o u r M E G A p i x c a m e r a .
1. DHCP: Select DHCP to access the camera within the same internal network. For further
explanation on DHCP, please see page 15.
2. PPPoE: requires previous registration. Enter the username and password.
3. Static IP: Select Static to connect to the camera from an external network. For further
explanation on Static, please see page 15
4. Use DDNS: Check this option to use DDNS service. For further explanation on DDNS, please
see page 15.
5. Port: The port numbers required for communication with the camera. Use the IP Finder to
change other basic settings for your
MEGApix camera. (The menu
options may vary
depending on the
camera model.)
*If you change the camera's IP, write down the camera's MAC Address for identification in the future.
1 5
[4]
[1]
[2]
[3]
[5]