WEBVIEWER*
R e m o t e V i d e o M o n i t o r i n g V i a C h r o m e , F i r e f o x , o r S a f a r i
Y o u c a n v i e w y o u r M E G A p i x c a m e r a u s i n g w e b b r o w s e r s o t h e r t h a n
I n t e r n e t E x p l o r e r . T o d o s o , a t l e a s t o n e o f t h e s t r e a m s o f t h e c a m e r a
m u s t b e s e t t o t h e c o d e c M J P E G .
1.
Open Google Chrome, Mozilla Firefox, or Apple Safari Web Browser.
2.
Enter the camera's IP address. If the first stream is set to H.264, video will not be displayed
on the GUI.
3.
Click the Setup button located at the top right side of the page. Then go to Video > Stream
Settings.
4.
Modify one of the two streams to the codec MJPEG.
5.
Click Apply and Reload to make sure all changes have been saved.
Click on Live View to return to the camera's main page.
6.
7.
At the bottom of the page, select the stream you set as MJPEG to start streaming video.
2 0