Page 15
If you use a static IP address assigned by your ISP If you have a dynamic address provided by your ISP admin.
Page 21
If you use Case B, C If you use Case A, D...
Page 31
Profile List Display profile list. Click 'Add' to add camera settings. Click 'Modify' to modify selected item from the profile list. Click 'Delete' to delete selected item from the profile list. Click 'Apply' to apply selected item from the profile list.
Page 32
Sharpness Saturation Brightness Contrast Click 'Cancel' to return to the previous setting. Click 'Default' to settings to the factory defaults.
Page 33
Auto Exposure Slow Shutter Level Automatic exposure(AE) automatically sets the aperture or Slow shutter Level lets you adjust the amount of light striking shutter speed, based on the external lighting conditions the sensor, determin when the video sensor sends out its for the batch of data for processing.
Page 34
Day & Night Transition Time Auto: set to A rate at which Day: ensitivity will be reduced in the dark light condition but better color Click 'Cancel' to return to the previous setting. reproduction performance obtained. Click 'Default' to settings to the factory defaults. Night: ensitivity will be enhanced in the dark light condition.
Page 35
WDR (Wide Dynamic Range) WDR Level Select the WDR level depending on the difference in brightness between the darkest and lightest part of an image. Click ‘Save’ to Click 'Cancel' to return to the previous setting. Click 'Default' to settings to the factory defaults.
Page 36
Activation RGB Gain The R/G/B gain can be set only when the White Balance Mode is set to Manual. White Balance Mode Select White Balance depending on the lighting conditions. Click ‘Save’ to Click 'Cancel' to return to the previous setting. Click 'Default' to settings to the factory defaults.
Page 37
3D Noise Reduction Mirror Flip Click ‘Save’ to Click 'Cancel' to return to the previous setting. Click 'Default' to settings to the factory defaults.
Page 38
Flicker Click ‘Save’ to Click 'Cancel' to return to the previous setting. Click 'Default' to settings to the factory defaults.
Page 40
Network Type Preferred DNS Server Alternate DNS Server Define the Secondary DNS server IP address. IP Address Define the IP address. The address is consisted of four HTTP Port numbers separated by dots and the range of each number is from 0 to 255. between 1025 to 60000.
Page 41
General Setting Zero configuration Information It displays the unique id or address. Click ‘Apply’...
Page 42
Authentication None: Allows access without ONVIF authentication. WS - Username token: Allows access with WS-User Token of ONVIF authentication. WS + Digest: Allows access with WS- User Token and Digest of ONVIF authentication. Discovery Mode function can be enable or disable.
Page 43
General Setting UPNP function can be enable or disable. Friendly Name Define the friendly name.
Page 44
DDNS Disable Public DDNS To use public DDNS service, select a site DDNS Provider Site Address DynDNS www.dyndns.com No-IP www.no-ip.com Click ‘Apply’...
Page 45
transfer save Password Password to access the FTP Server. General Setting Click ‘Apply’ FTP Server Address FTP Server IP Address. FTP Upload Path Define a path in FTP server to store video . For the path name, English Alphabets, numbers and special characters ( / ~ !@ $ ^ ( ) _ - { } [ ] ;...
Page 46
image to relevant site by Email Password SMTP the Password to access SMTP Server. General Setting E-Mail Sender e-mail address Mode Select ecurity mode rom Plain or SSL / TLS. E-Mail Receiver the e-mail address of E-Mail Receiver. SMTP Server Address the SMTP Server Address.
Page 47
Action rules List Click ‘Add’ to add custom action rules. Click ‘Modify' to modify selected item from the action rules list. Click 'Delete' to delete selected item from the action rules list.
Page 48
Name name Operation Duration time duration Action1 ~ Aciton5 Select Click ‘Save’ to...
Page 49
Pre / Post Alarm Image Image Transfer due to event is configured by setting Image transfer rate and Pre / Post alarm duration. Descriptions Number Define Number of image transferred per second. of Image Pre-alarm Define duration of image transfer before an event. Duration Post-alarm Define duration of image transfer after an event.
Page 50
Event Rules List custom Event Rule Event Rules list. Click ‘Add’ to add custom event rules. Click ‘Modify' to modify selected item from the event rules list. Click 'Delete' to delete selected item from the event rules list.
Page 51
Activation Name name Event ules Event Select event Schedule Week / Time efine Start time and End time The setup schedule is repeated every week. Click ‘Save’...
Page 52
Mode The Schedule function can be enable or disable . Repeat Rule Set a recurring time the event occurs Click ‘Apply’...
Page 53
Sensitivity Motion Detection the sensitivity of motion detection hows Motion event status. . If it will detect Event Alert Icon( ) appears if ‘Motion Detection’ is activated. very small motion Area Set the motion detected area. Click ‘Save’ You can set up to four areas.
Page 54
Target Stream Select the channel you want to record. Click ‘Save’ Recording List Display information recording settings. Click ‘Modify’ to modify selected item in the recording list.
Page 55
Enabled File Type Select the recording file type Storage Select the storage type. Continous mode is Pre Duration duration of recording before an event Post Duration duration of even Click ‘Save’...
Page 56
Filter date / time, event, sort or storage format Click the 'Refresh' button to refresh the records list. Click 'Filter' to view the filtered recorded video. Recording List Click 'Play' to view the selected item in list of recorded video. Click 'Remove' to delete the selected item recorded video Click 'Download' to download the selected item.
Page 57
Recording Video Viewer Play the recorded video. Recording Video Information Display information the recorded video Click 'Replay' to view the recorded video again. Click 'Back' to return to the previous menu.
Page 58
Display the SD card information mounted from device.
Page 59
Storage Size Unmount Total capacity of SD card and emove the SD card from the device. displayed. Format Auto Delete Delete the all contents stored in SD card. Select the period for Auto delet The image data stored before period will be Click ‘Apply’ deleted automatically.
Page 61
Warning: Version Information It shows the current Firmware Version. Do not turn off the power during the Firmware update. he system can unstable. the system will Web Update reboot automatically. Select the Firmwar file your computer by clicking [Select file] button. Start F/W Update start update.
Page 62
FTP Server Address Password Password to access to the FTP Server. Server FTP Upload Path FTP Port Define a path in FTP server to store video. For the path name, the FTP Server Port. English Alphabets, numbers and special characters ( / ~ ! @ $ ^ ( ) _ - { } [ ] ;...
Page 63
TimeZone Setup Synchronize with time sever Time Zone camera time server Date will be updated automatically every hour. Prior to setting below ‘New Camera Date & Time’, set correct Click ‘Apply’ to Current Date & Time Shows the current date and time setting in the Camera. Synchronize with my computer Set the date time using th...
Page 64
Daylight Saving Time (DST) is the practice of setting the clocks forward one hour from standard time during the summer months, and back again in the fall. General Setting Date&Time Settings Set the Start time and end time the DST. Click ‘Apply’...
Page 65
Users Modify List all user accounts for Modify the information of user account. For admin account, only Password can be modified. Register a new user Delete Delete selected user account. Admin account cannot be deleted. Enter a new user ID except Admin. Password Enter the user Password.
Page 66
Filter Select a date, sort or type of log to filter the log. Click the 'Refresh' button to Click 'Filter' to view the filtered log. System Log List...
Page 67
Language Select the language Click ‘Apply’ to...
Page 68
Reset to the factory default eturn setup to the factory default Reset all Settings to the factory defaults. Except Network Settings xcept etwork related settings. Only camera settings Reset only Click ‘Apply’ to...