Martin RoboScan Pro 918 User Manual page 13

R e s e t d e f a u l t o f f s e t s (
Reset all calibrations to their factory defaults. Select
>MENU@ to escape.
R e s e t d e f a u l t p e r s o n a l i t y s e t t i n g s (
Return all personality settings (not calibrations) to their factory defaults. Select
LOA D is displayed.
C u s t o m c o n f i g u r a t i o n s (
Save and load 3 sets of custom configurations. To save a custom configuration, adjust the settings as desired, go to
CUS 1 , C US2
press [ENTER] when
U p l o a d m o d e (
Upload mode prepares the RoboScan Pro 918 to receive control software. It is normally engaged automatically when
using a Martin uploader. In certain circumstances, however, you may have to set upload mode manually as described
under "Updating software" on page 19.
13
SPEC /dF OF
S PEC
, or C US3 and press [ENTER] when
L OAD is displayed.
)
UPL d
RoboScan Pro 918
)
dFO F and press [ENTER] when
/
S PEC d FSE
/ / ,
d FSE C US1 C US2
SAV E is displayed. To load a custom setting, select it and
SUR E is displayed, or press
/ )
F ACT
FA CT and press [ENTER] when
, )
CU S3