Quick Reference Guide
Comfort Pad Replacement
Removal
Flip the Imager over, such that the bottom of the
1.
Imager and the Comfort Pad are facing upwards.
Insert the tip of your finger under the edge of the
2.
Comfort Pad at the back of the Imager.
Lift the Comfort Pad upwards and remove it from the
3.
Imager.
CAUTION Removing the Comfort Pad other than the described above may
Installation
Position the Comfort Pad onto the Imager as shown.
1.
Press the Comfort Pad onto the Imager. When properly installed, the Comfort
2.
Pad locks into place.
Trigger Swivel Assembly Replacement
Removal
Turn the Imager upside-down.
1.
Remove the Comfort Pad.
2.
Use a paper clip or similar object to
3.
press the Release Latch.
Rotate the Trigger Swivel Assembly
4.
(or Triggerless Strap Holder) to
align with the back of the Imager.
Lift the Trigger Swivel Assembly off
5.
the Imager.
result in damage to the Trigger Swivel Assembly of the Imager.
2
Triggerless
Strap Holder
3
Imager Back
1
Release Latch
21