Finger Strap Replacement (Trigger Swivel Assembly) - Motorola RS507 Quick Reference Manual

Quick Reference Guide
Installation
Turn the Imager upside-down.
1.
Position the Triggerless Strap
2.
Holder to align with the back of
the Imager.
Lower the Triggerless Strap
3.
Holder to the Imager.
Rotate Triggerless Strap Holder
4.
1/4 turn counterclockwise.
Finger Strap
Replacement (Trigger
Swivel Assembly)
Removal
Remove the Finger Strap from the
1.
Strap Buckle.
Pull the Finger Strap out of the
2.
Trigger Swivel Assembly.
Installation
Align a new Finger Strap with the
1.
Slots in the Trigger Swivel Assembly.
Gently press the Strap Pins to
2.
engage with the slots of the Trigger
Swivel Assembly. The Strap Pins
snap into the slots.
Slip the Finger Strap through the
3.
Strap Buckle.
2
1
Strap Pins
Slots Strap Buckle
23
Finger Strap
Trigger Swivel
Assembly