Table of Contents
Advertisement
6. Put the battery back in place, turn the computer over again, and reconnect the cables. For more
information about how to reinstall the battery, refer to "Replacing the battery" on page 69.
Replacing the Ultrabay device
Before you start, print these instructions.
To replace the Ultrabay device, do the following:
1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer.
2. Unlock the bay lock latch
position, slide the bay eject latch
3. Insert the replaceable device into the bay; then press the device firmly into the connector.
98
User Guide
1
by sliding it to the top. While holding the bay lock latch in the unlocked
2
to the left, then pull out the Ultrabay device
3
.
Advertisement
Table of Contents
