ThinkPad T430 User Manual page 141

Table 6. Security menu items (continued)
Menu item
Submenu item
Hard Disk x Password
Fingerprint Predesktop
Authentication
Reader Priority
Security Mode
Password
Authentication
Reset Fingerprint Data
Security Chip Security Chip
Security Reporting
Options
Clear Security Chip
Intel TXT Feature
Value
Comments
• Disabled See "Hard disk passwords" on page 50.
• Enabled
Notes:
• Hard Disk 1 means the hard disk drive built
into your computer.
• Hard Disk 2 is displayed on the Password
submenu only if a secondary hard disk drive is
installed in the Serial Ultrabay Enhanced bay.
• Disabled Enable or disable fingerprint authentication
before the operating system is loaded.
• Enabled
• External ➙ If External ➙ Internal is selected, an external
Internal
fingerprint reader is used if attached. Otherwise,
an internal fingerprint reader is used. If Internal
• Internal Only
Only is selected, an internal fingerprint reader is
used.
• Normal
If fingerprint authentication fails, you can still start
the computer by entering a password. If you have
• High
selected Normal, enter a power-on password
or a supervisor password; if you have selected
High, enter a supervisor password.
• Disabled Enable or disable password authentication.
If high security mode is selected, this item is
• Enabled
displayed.
• Enter This option is used to erase all fingerprint data
stored in the fingerprint reader and reset settings
to the factory state. As a result, any power-on
security features previously enabled will not be
able to work until they are re-enabled in the
fingerprint software.
• Active
If you select Active, the security chip is functional.
If you select Inactive, the Security Chip option
• Inactive
is visible, but the security chip is not functional. If
• Disabled
you select Disabled, the Security Chip option is
hidden and the security chip is not functional.
Enable or disable the following Security Reporting
Options:
• BIOS ROM String Reporting: BIOS text string
• CMOS Reporting: CMOS data
• NVRAM Reporting: Security data stored in
the Asset ID
• SMBIOS Reporting: SMBIOS data
• Enter Clear the encryption key.
Note: This item is displayed only if you have
selected Active for the Security Chip option.
• Disabled Enable or disable Intel Trusted Execution
Technology.
• Enabled
.
Chapter 8 Advanced configuration
123