Table of Contents
Advertisement
Table 5. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)
CPU
120
User Guide
Submenu item
Intel (R) Rapid Start
Technology
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Core Multi-Processing
Intel Hyper-Threading
Technology
Value
• Disabled
• Enabled
Enter after:
• Immediately
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
• Disabled
• Enabled
• Enabled
• Disabled
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
Comments
If you select Enabled, the
system is powered on when
the ac power adapter is
attached. When the system
is in hibernate state, the
system resumes.
If you select Disabled, the
system is not powered on
nor resumed when the ac
power adapter is attached.
To use this feature, a special
partition on the solid state
drive is required.
When enabled, you can
enable the 30 Day Standby
function through the Power
Manager program. The
function enables the
computer to enter a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Enable or disable keyboard
beep when unmanageable
key combinations are
pressed.
Select SATA controller
operation mode.
Enable or disable additional
execution core units within
a CPU.
Note: If you are using a
computer with a single-core
processor, this item is not
available.
Enable or disable additional
logical processors within a
processor core.
Advertisement
Table of Contents
