Table of Contents
Advertisement
Table 5. Config menu items (continued)
Menu item
USB
116
User Guide
Submenu item
Ethernet LAN Option ROM
(for Legacy Only boot
mode or Both with Legacy
first)
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
USB UEFI BIOS Support
Always On USB
Always On USB Charge in
off mode
USB 3.0 Mode
Value
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
Comments
• AC power is required
with magic packet type
Wake on LAN.
• The Wake on LAN
function does not
work when a hard disk
password is set.
Load the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
Enable or disable IPv4
(Internet Protocol Version 4)
network stack for the UEFI
environment.
Enable or disable boot
support for USB storage
devices.
If you select Enabled, the
external USB devices can
be charged through USB
connectors even when the
system is in low power
mode (sleep, hibernate, or
power-off).
If you select Enabled, the
Always On USB connector
enables you to charge some
devices, such as iPod,
iPhone, and BlackBerry
smartphones when the
computer is turned off.
Note: If you want to charge
these devices when your
computer is turned off, you
will need to open the Power
Manager program and
configure corresponding
settings to enable the
Always On USB connector
function. For details
about how to enable the
Always On USB connector
function, refer to the online
help information system
of the Power Manager
program.
Set the USB 3.0 controller
mode for the ports shared
between USB 2.0 and USB
3.0 controllers.
Advertisement
Table of Contents
