Access Control - Draytek Vigor2920 Series User Manual

Item
WEP
4 . 1 4 . 4 A c c e s s
4 . 1 4 . 4 A c c e s s
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.
Available settings are explained as follows:
Item
Enable Mac Address
Filter
Vigor2920 Series User's Guide
Description
as "0x321253abcde...").
64-Bit - For 64 bits WEP key, either 5 ASCII characters, such
as 12345 (or 10 hexadecimal digitals leading by 0x, such as
0x4142434445.)
128-Bit - For 128 bits WEP key, either 13 ASCII characters,
such as ABCDEFGHIJKLM (or 26 hexadecimal digits leading
by 0x, such as 0x4142434445464748494A4B4C4D).
All wireless devices must support the same WEP encryption bit
size and have the same key. Four keys can be entered here, but
only one key can be selected at a time. The keys can be entered
in ASCII or Hexadecimal. Check the key you wish to use.
C o n t r o l
C o n t r o l
Description
Select to enable the MAC Address filter for wireless LAN
identified with SSID 1 to 4 respectively. All the clients
348