Draytek Vigor2920 Series User Manual page 20

Interface
Factory Reset
Phone 1/2
GigaLAN (1-4)
WAN1/WAN2(Giga)
USB
PWR
ON/OFF
Vigor2920 Series User's Guide
Description
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you see
the ACT LED begins to blink rapidly than usual, release the button. Then the
router will restart with the factory default configuration.
Connecters for analog phone(s).
Connecters for local networked devices.
Connecters for remote networked devices.
Connecter for Mobile HDD, 3G Modem or printer.
Connecter for a power adapter.
Power Switch.
10